🛑 STOP Your ARTIFICIAL TURF from MELTING 🔥 Do-It-Yourself Window Film Solution 😎 Ships in 72 Hours or Less 📦

Ways to Stop Reaching the Melting Point of Artificial Grass

The melting point of artificial grass is extremely high. In fact, it can reach up to 200 degrees Fahrenheit. Nonetheless, it does not mean that it is fadeproof. There are contributing factors, which trigger your fake lawn to melt.

One of the reasons why your artificial turf is melting is because of your burnished gutter. Polished drain re-radiates reflected heat, causing your lawn to disintegrate. Another reason is the direct application of heat. When you light up a fire pit, sparks could fly, resulting in burning the plastic grass.

Nonetheless, the leading cause of reaching the melting point of artificial grass is your energy-efficient window. When the sun rises and strikes the Low-E coating, it reflects the heat away; hence, it keeps your room cool despite the weather. However, because the heat has nowhere else to go, it magnifies and focuses the light on your grass. As a result, the increased heat disintegrates your faux lawn.

Fortunately, you no longer need to deal with the window reflection from burning your grass. There are a couple of ways to avoid reaching the melting temperature of artificial turf. Here are some of them.

Replace the Infill With Rubber.

The purpose of the infill is to keep the grass blades in place. However, infill could heat up the surface. The worst part is that it could cause harm to your loved ones. To stop reaching the melting point of artificial grass, you need to replace the infill with rubber materials. It holds the grass without the adverse effects of infills. However, you need to allot a budget and time, as it would take hours and money to replace this part.

Keep the Field Hydrated.

Another way to stop the synthetic turf from melting is through irrigation. Many people think that the fake grass does not need water because it is plastic. However, faux lawns are naturally hotter than the real ones. Hence, the more it needs hydration.

To keep the field fresh, you need to water the grass every 30 minutes. However, you must expect that your water bill will increase if you choose this method.

Apply Perforated Window Films

Out of all these solutions, this is the best way to stop melting out in the turf. These films deflect off the light and distribute the heat evenly.

These window film features and more are available at Turf Guard Window Film. Check out our website and find out how our products can stop reaching the melting point of artificial grass.

Leave a comment

Please note, comments must be approved before they are published