A vinyl siding is a type of wall material made of polyvinyl chloride (PVC). Many people prefer this cladding material because of its impressive features. For one, it adds appeal to your property. It also requires less maintenance and it is one of the cheapest outer wall material.
However, vinyl siding is susceptible to melting. Even though the flame ignition temperature is relatively high, the vinyl siding melting point is low. In fact, it only reaches up to 165 degrees Fahrenheit. Because of this, many people want to know if it can be prevented. Moreover, they want to know how they can find out that their walls have reached the melting temperature of vinyl siding.
How to Tell if Your Vinyl Siding Has Reached Its Melting Point
There are two indications that you need to look for to know if your vinyl siding starts melting. These are:
- The Temperature in Your House
One of the best features of PVC walls is the ability to control the room temperature. Like energy-efficient windows, vinyl siding can make the room cozy, regardless of the weather. Therefore, if you notice a significant increase in your electricity bill, there’s a chance that your wall if it has reached the vinyl siding melting point.
- Uneven Wall Surface
If you see some curving patterns on your wall, it only means that your vinyl siding has reached its melting temperature. This unusual event happens when you or your neighbor’s Low-E windows become slightly concave. This concavity acts like a magnifying glass. As soon as the sun reaches your neighbor’s window, it bounces off the light to the next-door wall. As a result, it triggers the vinyl siding melting point, resulting in thermal distortion in vinyl siding.
How to Deal with This Issue
There are many vinyl siding melting solutions that you can try. One, you can replace your wall with a heat resistant vinyl siding. However, it can be a costly solution because you need to buy the materials and hire an installer to place the sidings.
If you’re looking for an affordable yet efficient solution, then you must choose Turf Guard Window Film. This product has anti-reflective properties that refract the light off. Additionally, it breaks the heat path so that all sides can get the same amount of temperature. With this solution, you don’t have to worry about reaching the vinyl siding melting point.
